What problems often occur in the tail wheel of bucket elevator
Add Time：
2019-04-28
The tail wheel of the bucket elevator is generally prone to problems, and if there is a problem with the tail wheel, it will affect the normal operation of the bucket elevator, and it is more likely that the material belt will deviate, and then the material cannot be delivered normally during the conveying process. To the specified height, the specified location.
If it is said that there is a problem with the tail wheel of the bucket elevator, then the corresponding head wheel must also have a problem. Because the tail wheel and the head wheel are in a vertical meeting, if the drive shaft is in a vertical plane but unbalanced, the drive shaft of the head wheel and the tail wheel will be offset. Although the two drive shafts are parallel, although they are on the same vertical plane but not horizontal, the phenomenon of hopper deviation will occur, and the hopper deviation may collide with the barrel, and the hopper belt will be torn.
We all know that the front end of the bucket elevator will bear a relatively large dynamic pressure, and the bearings will definitely experience extrusion wear after running for a long time. Some people use simple repair welding or brush plating to save trouble and continue to use it. However, this will definitely have drawbacks, and it is easy to cause damage to the material of the welding part. If you continue to use it, it will bend or break, so there will still be a problem of offset between the head and tail wheels, which cannot fundamentally solve the problem.
MORE NEWS
Shandong Tianyi Steel Silo Drying Equipment Co., Ltd.
Add：No.7 Fuqian Street, Dongying Economic Development Zone, Dongying City, Shandong Province, China
TEL：+86-546-8077699
FAX：+86-546-8077599
Phone：+86-13954610797 +86-18605468825
E-mail：sdtianyi999@163.com
Copyright © 2023 Shandong Tianyi Steel Silo Drying Equipment Co., Ltd.